Listed below are all Gryphon Corporation products, including some which are no longer in production. Refer to the chart for information regarding accessories and replacement parts.
| Model Number | Model Name | Description | Comments |
| C | Diamond Band Saw | Grey Plastic, motor on top, no spring tension, 23mph motor | Uses #301BD or #301F blade, C series guides |
| Omni-1 | Diamond Wire Saw | Grey plastic case, gravity feed cooling system. | Uses all current Omni accessories except pump. |
| Omni-2 | Diamond Wire Saw | Purple plastic case, pump in base | Uses all current Omni accessories |
| Omni-2 Plus+ | Diamond Wire Saw | Purple plastic case, pump in base | Uses all current Omni accessories |
| KS-8 | Thermal Butt Weld Splicer | 8mm | Uses metal screen |
| HB-2-16 | 16mm Squeegee | Stainless Steel - Compressed Air or Filtered Water | Clean with standard solvant |
| KS-16 | Thermal Butt Weld Splicer | 16mm | Uses metal screen |
| KS-16M | Thermal Butt Weld Splicer | 16mm Microfilm | Uses metal screen |
| ST-16 | Film Roller | Stainless Steel Sidewalls - Soft Touch Sleeves | Available |
| C-23 | Diamond Band Saw | Grey Plastic, motor on top, spring tension, 23mph motor | Uses #301BD or #301F blade, C series guides |
| UV-25 | Universal Voltage Control | Cast Aluminum Chassis | Clean with standard solvant |
| HB-2-35 | 35mm Squeegee | Stainless Steel - Compressed Air or Filtered Water | Clean with standard solvant |
| AR-35 | Automatic Rewind | 35mm | For laboratory use only |
| KS-35 | Thermal Butt Weld Splicer | 35mm | Uses metal screen |
| KS-35M | Thermal Butt Weld Splicer | 35mm Microfilm | Uses metal screen |
| MR-35 | ServoMaster Rewind | 35/16mm | For laboratory use only |
| S-35 | Expanding Core Spindle | 35/16mm | Discontinued |
| ST-35 | Film Roller | Stainless Steel Sidewalls - Soft Touch Sleeves | Available |
| DW-35 | Dumb Waiter Control Unit | 35mm Nylon cable - Intelegent controller - 300 lb. capacity | Special Order Only |
| C-40 | Diamond Band Saw | Grey Plastic, motor on top, spring tension, 40mph motor | Uses #301BD or #301F blade, C series guides |
| 67 | Strobe Flashlight | Safe for use in darkrooms | Uses standard neon bulb - uses two #417 Eveready 67.5 Volt batteries |
| HB-2-70 | 70mm Squeegee | Stainless Steel - Compressed Air or Filtered Water | Clean with standard solvant |
| MR-70 | ServoMaster Rewind | 70/35mm | Discontinued |
| S-70 | Expanding Core Spindle | 70/35mm | Discontinued |
| 100 | 10-in-One Lapidary Workshop | Aluminum base unit with motor and coolant system. | Uses standard discs, cones, blades from sources such as Diamond Pacific Tool Corp. (760-255-1030). For other parts, inquire. Instructions here |
| R-100 | Carving Rock'er | Open Frame Craving machine | Uses standard carving tools from sources such as Diamond Pacific Tool Corp. (760-255-1030). For other parts, inquire. |
| S-100 | Spindle Support | 35mm | Discontinued |
| 101 | 6" Trim Saw | Attachment for #100 | Rock Rascal Mdl J. Uses standard 6" blade, available in various grits. Available from all Lapidary dealers. |
| SR-101 | Servo Powered Rewind | Basic Unit | 110 vac |
| 102 | Trim Saw Vice | Attachment for #101 | Rock Rascal Mdl J Vice |
| SR-102 | Servo Powered Rewind | For Reels, 35/16mm or 70/35mm | 110 vac |
| SR-103 | Servo Powered Rewind | Roller Guide with Core Adaptor, 35/16mm | For laboratory use only |
| SR-104 | Servo Powered Rewind | Roller Guide with Expanding Spindle | Discontinued |
| SR-105 | Servo Powered Rewind | Cone Guides with Expanding Spindle | Discontinued |
| 106 | Chuck and Adaptor | 0-1/4" chuck with adaptor for #100 | Available from Gryphon. inquire. |
| SR-106 | Servo Powered Rewind | Tightwind with Expanding Spindle | Discontinued |
| 108 | Lamp and Mount | Lamp assembly for #100 | Available from Gryphon. inquire. |
| 109 | Magnifier | Mounts onto shade of #108 | Available from Gryphon. inquire. |
| 111 | Electric Dop Wax Heater | 110 vac | Available from all Lapidary Dealers |
| 112 | Precision Slicer/Slaber | Attachment for #100 | Uses 6" by .012" diamond blade. |
| 114 | 10" Trim Saw | Attachment for #100 | Uses standard 10" blade available from all Lapidary dealers. |
| 115 | Transparent Carving Hood | Attachment for #100 | Special Order Only |
| 116 | 10" Trim Saw Vice | Attachment for #114 | Available from sources such as Diamond Pacific Tool Corp. (760-255-1030). |
| 117 | Preformer with Cabbing Attachment | Attachment for #100. Includes mounting plate. | Cabbing attachment available from sources such as Diamond Pacific Tool Corp. (760-255-1030). |
| 125 | Speed Cone Set | Attachment for #100 | Use diamond powder from sources such as Diamond Pacific Tool Corp. (760-255-1030). |
| T-126 | Trimmer Perforator | 35mm | Discontinued |
| 127 | Faceting Head | Attachment for #100. Includes mounting plate. | Available from Gryphon. inquire. |
| 130 | Glass Workshop | Beveling Outfit | Diamond tools available from sources such as Diamond Pacific Tool Corp. (760-255-1030). |
| AF-168 | Stained Steel Roller | 16mm/8mm | Available |
| AF-235 | Stainless Steel Roller | 35mm/16mm | Available |
| 200 | Micro Wire Saw | For intarsia work. Uses .007" diamond wire. | Wire available from South Bay Technology (949-492-2600) Instructions here |
| 200-CP | Cuematic Perforator | Tape perforator | Available |
| 200-CR | Cuematic Reader | Tape Reader | Available |
| R-200 | Cabing Rock'er | Open frame cabbing machine | Uses same discs and cones as #100 |
| 201 | Precision Slicing Attachment | Attachment for #200 | Available from Gryphon. inquire. |
| 202 | Magnifier | Attachment for #200 | Available from Gryphon. inquire. |
| 203 | 50' Spool of Micro Wire | Fits #200 | Available from South Bay Technology (949-492-2600) |
| 204 | Foot Switch | Accessory for #200, 300 | Available from Gryphon. inquire. |
| 300 | Diamond Band Saw | Gold Aluminum Case. World's first saw for cutting glass. | Use #301BD or #310F Gryphon Diamond Blades (same blade as current Diamond Band Saw). For other parts, inquire. Instructions here. |
| 301BD | Diamond Blade (Standard) | Fits #300, 350, C, C-23, C-40. 37" Circumference by 1/8". Also fits saws from Inland, Diamond Tech. | Available from all Stained Glass Dealers |
| 301F | Diamond Blade (Heavy Duty) | Fits #300, 350, C, C-23, C-40. 37" Circumference by 1/4". Also fits saws from Inland, Diamond Tech. | Available from all Lapidary dealers |
| 302 | Blade Repair Kit | Fixture and materials for repair of older style blades. | Not required with current blades |
| 305 | Teflon Guide | Blade guide for #300 (2 required per saw) | Use current C-guides |
| 350 | Diamond Band Saw | Gray Plastic Case, motor on bottom | Use #301BD or #310F Gryphon Diamond Blades (same blade as current Diamond Band Saw). Use C-guides in place of Teflon/Roller guides. For other parts, inquire. Instructions here. |
| 400 | Diamond Gem Lathe | Gold Aluminum Chassis | Uses standard discs and cones available from all Lapidary Dealers |
| D-416 | Scratch Detector | 16mm | Use GE lamp #1076 or 1142 |
| D-435 | Scratch Detector | 35mm | Use GE lamp #1076 or 1142 |
| 500 | Power Take-Up | 16mm, 35mm, 70mm | 110 vac |
| 550 | Power Glass Score | Gold Aluminum Case | Uses standard Toyo TC-10 replacement head available from all Stained Glass Dealers |
| 575 | Multiple Strip Cutter | Holds full sheet of glass - Pneumatic powered | Uses standard Toyo TC-10 replacement head available from all Stained Glass Dealers |
| 600 | Band Saw | "Virtuoso" Glass, wood, metal band Saw | Uses number 601 blade |
| V-600 | Film Desk Viewer | Daylight Color Temperature | Uses standard fluorescent tube |
| 601 | Diamond Blade | Fits # 600. 43" Circumference | No longer available. |
| 700 | Power Jewelers Saw | Gold Aluminum Case | Uses standard 5" Jewelers blades. |
| 800 | Post Spice Station | 35mm | 110 vac |
| 816 | Film Splicer | 16mm Full Wrap Around | Uses standard splicing tape |
| 835 | Film Splicer | 35mm Semi Wrap Around | Uses standard splicing tape |
| 835 C | Film Splicer | Combination 16mm and 35mm Wrap Around | Uses standard splicing tape |
| 855 | Film Splicer | Available in several configurations | 110 vac |
| 870 | Film Splicer | 70mm Semi Wrap Around or 35mm Full Wrap Around | Uses standard splicing tape |
| 870 C | Film Splicer | Combination 70mm and 35mm Wrap Around | Uses standard splicing tape |
| DS-2416 | Dual Scratch Detector | 16mm Bench inspection system | Use GE lamp #1076 or 1142 |
| DS-2435 | Dual Scratch Detector | 35mm Bench inspection system | Use GE lamp #1076 or 1142 |
| C-3000 | Cone Guide | Accessory for SR series | Discontinued |
| 5001 | Power Rewind | Universal 16mm or 35mm - Maximum capacity 6000 ft. | 110 vac |
| 5002 | Power Rewind | 70mm - Maximum capacity 3000 ft. | 110 vac |
| S | Stop Motion Flashlight | Safe for use in darkrooms | Uses standard neon bulb |
| FG series | Film Gauge | 35mm picture printer, sound printer, 16mm picture printer, sound printer | Available from Gryphon. inquire. |
| E | Processing Previewer | Stroboscopic with tachometer | Uses standard fluorescent tube |
| Sun | Sundial | Solid Bronze | Currently unavailable |
